home *** CD-ROM | disk | FTP | other *** search
- *****************************************
- * Printer Adaption for IdeaList V3.4 *
- *****************************************
- * Comments: from '*' to line end *
- * *
- * Syntax of control codes: *
- * 65 66 = $41 $42 = 'A''B' = 'AB' *
- * *
- * Unnumerical chars and blanks *
- * between codes are permitted. *
- *****************************************
- * *
- * Standard adaption file *
- * for 24-pin matrix printers *
- * *
- *****************************************************************
- * *
- * Paper lengths: LETTER size (11") *
- * *
- * IMPORTANT NOTE: *
- * All the German adaptions use other lenghts: *
- * - cut sheet : 11.67" ('DIN A4') *
- * - continous paper: 12" *
- * To use LETTER sheets you have to modify the following lines: *
- * - "net page length" ("Netto-Seitenlänge Endlos") *
- * - "number of lines, single sheet" ("Zeilenzahl Einzelblatt") *
- * - "define gross page length" ("Brutto-Seitenlänge festlegen")*
- * *
- *****************************************************************
- *
- * Name of Adaption (up to 32 chars):
- Standard 24 pins, LETTER
- *
- * Names of the Font Sizes (up to 12 chars):
- Pica 10cpi* size 1
- Elite 12cpi* " 2
- Cond. 17cpi* " 3
- Narrow 20cpi* " 4
- *
- * Name of the Joker (up to 12 chars):
- Joker (free)
- *
- * Fonts (0 = internal):
- 0 * size 1
- 0 * " 2
- 0 * " 3
- 0 * " 4
- *
- * Size Parameters:
- 10.7 * net page length in inch (contionous paper) [LETTER size!]
- 0.5 * text distance in inch (chain mode)
- 0.3 * minimum rest length in inch (chain mode)
- 56 * number of lines in pica-lines (6 lpi) (single paper) [LETTER size!]
- 6 * lines/inch size 1
- 8 * " " 2
- 8 * " " 3
- 10 * " " 4
- 80 * maximum line length in pica-chars (10 cpi)
- 10 * chars/inch size 1
- 12 * " " 2
- 17 * " " 3
- 20 * " " 4
- *
- 0 * reserved 1
- 0 * reserved 2
- 0 * steps/inch for horizontal spacing (0 = not used)
- *
- 0 * mode of sending (0=normal)
- 0 * configuration of port/cut sheet feeder
- * (0=parallel/manual, 1=para./auto, 2=serial/manual, 3=ser./auto)
- *
- * Printer Control Codes (maximum : 80 chars):
- 27 64, 27 82 0 * initialise [reset, USA-set]
- 27 64 * codes at the end
- 27 79 * skip-over perforation off
- 27 67 00 11 * define gross page length [11" = LETTER size!]
- 27 80, 18, 27 84 * define character wide/hight size 1
- * [10 cpi, condensed off, sub off]
- 27 77, 18, 27 84 * define character wide/hight size 2
- * [12 cpi, condensed off, sub off]
- 27 80, 15, 27 84 * define character wide/hight size 3
- * [10 cpi, condensed on, sub off]
- 27 77, 15, 27 83 1 * define character wide/hight size 4
- * [12 cpi, condensed on, sub on]
- 27 50 * define line spacing size 1 [1/6"]
- 27 48 * " " " " 2 [1/8"]
- 27 48 * " " " " 3 [1/8"]
- 27 65 6 * " " " " 4 [6/60" with 24-pins]
- 27 120 0 * draft
- 27 120 1 * letter quality
- 0 * joker on [free]
- 0 * joker off [free]
- 0 * reserved #1
- 0 * reserved #2
- 27 69 * bold on
- 27 70 * bold off
- 0 * light on [free]
- 0 * light off [free]
- 27 52 * italic on
- 27 53 * italic off
- 27 45 1 * underline on
- 27 45 0 * underline off
- 27 83 0 * superscript on
- 27 84 * superscript off
- 27 83 1 * subscript on
- 27 84 * subscript off
- 0 * init download data [not used]
- 0 * exit " " [ " " ]
- 0 * download font on [ " " ]
- 0 * " " off [ " " ]
- 0 * horizontal spacing (255 = replacement at runtime)
- * [not used]
- '0' 8 '/' * zero with slash
- *
- 0* Begin of Character Adaptions;
- * first Atari code,
- * then up to 20 printer codes;
- * when character not printable: 32
- 127 = '^' 8 '-' *
- 132 = 27 82 2,'{', 27 82 0 * ä
- 148 = 27 82 2,'|', 27 82 0 * ö
- 129 = 27 82 2,'}', 27 82 0 * ü
- 142 = 27 82 2,'[', 27 82 0 * Ä
- 153 = 27 82 2,'\', 27 82 0 * Ö
- 154 = 27 82 2,']', 27 82 0 * Ü
- 158 = 27 82 2,'~', 27 82 0 * ß
- 221 = 21 * §
- 189 = 67 * (C)
- 190 = 82 * (R)
- 254 = 32 * [not printable]
- 255 = 32 * [ " " ]
- 0* End of Character Adaptions
- *
- ************** End of Printer Adaption File ******************
-